Products / Surface Maintenance / Outdoor Lighting - Paint Touchup Small Surface Repairs
Repairs should be made in a clean dry area with stable temperatures ranging from 20°C. (68°F) to 25°C. (77°F). You will need the following tools:
> Cleaning solvent (Paint thinner, etc.);
> 100 Grit sand paper or abrasive wheel;
> Small stirring paddle;
> PPaint (Factory provided)
> Cloth rags;
> Small paint brush;
Typical repair conditions
Typical repair size
Step 1 / Surface Preparation
Mechanically clean all surfaces to be painted using the sand-paper or abrasive wheel. Remove all oxidation and corrosion. Apply solvent to surface area to be painted. Thoroughly clean dirt and abrasive residue from the area being careful not to apply solvent to the existing powder coat surface. (Solvents will remove the gloss of the original paint surface)
Step 2 / Surface Painting
The paint is supplied premixed in a small bottle. It should be shaken before being applied. On small surfaces it is suggested that a small brush supplied in the bottle’s cap be used to have uniform paint thickness. A properly mixed paint will not require a second coating. Allow parts to thoroughly dry for 30 to 45 minutes. When dry or hard to the touch reinstall.
Paint is applied on the prepared surface.
The paint should sightly overlap the surrounding surfaces.